If remote monitoring is required, a central processor unit (CPU) can be deployed within the OptEnet™ platform. An alarm card is available if only local alarm indications are required. The CPU and alarm card are optional. Only one of the two modules can be deployed in the chassis, so the network administrator must determine which alarm notification method is preferable.

Features

CPU:

• Serial and Ethernet interface
• SNMP, TL1 and Telnet communications protocols
• Compatible with all SNMP management platforms
• Daisy-chain up to four units, via one IP address
• Firmware upgrade via TFTP or serial
• Five simultaneous Telnet sessions

Alarm Card:

• Normally open and normally closed alarm contact